To understand high-pressure water jet - inevitably start from the high-pressure water jet parts

High pressure water jet is able to have such a large cutting function, which inseparable from the work closely with its various parts, in everyone use high-pressure water jet usually first be some understanding, and the understand the must began from the parts, so understanding the high-pressure waterjet parts which becomes the steps we have to go through, here we are together to learn about it!

In fact, a set of high-pressure water jet equipment accessories generally can be divided into three parts, one of which is the high-pressure pump, which is the power source of the high-pressure water jet to work, After we inport the tap water into the high-pressure water jet officially by the high-pressure pump increase the water pressure to dozens of times of usual, so when we use high-pressure water jet must pay attention to the high-pressure pump maintenance and repair, after all, if the high pressure pump strikes, then high pressure water jet as the loss of gasoline cars, can not be used, loses its own role.

Another part of the high-pressure water jet is processing platform, that can drive waterjet cutting head movement is to achieve waterjet cutting material control device, works just like the hands of a TV remote control in general, we can not change the channel without the remote controller, if there is no high-pressure water jet equipment processing platform, when we cut the material can not control the movement of the cutting head, can not cut the material according to our needs, the entire high-pressure water jet equipment will not work, so when we used in peacetime should pay attention to check its processing platform.

During operation, if there are any flaws or minor damage should be repaired, if the problem is too big, we should consider replacing its problematic parts, so that each function can operate normally, this is second part of the answer about what the problems of high-pressure waterjet accessories.

The cutting head is another part of the high-pressure water jet, also perform part of its cutting materials, high-pressure water jet only with high-strength, high hardness of the cutting head in order to complete work on a variety of cutting hardness of the materials, cutting head is water flow path, water flows after the high pressure pump pressurized through the cutting head ejects, its strength is enough to cut a number of hard materials, the cutting head aperture width can affect the outflow of water pressure, so in the choice of high-pressure water jet accessories need to pay more attention to its pore size.

The above is our discussion on high-pressure water jet three important parts, I believe everyone through the front of the understanding, will be able to find all parts of high pressure water jet has a clear division of labor, together to complete the high-pressure water jet cutting work, only the quality of the individual parts can be guaranteed, in order to ensure the high pressure waterjet for our service.