How the water jet cutting accomplish hard material cutting?

With the development of technology, more and more machine tools, use more widely. According to waterjet cutting machine parts manufacturers introduced, used for material cutting, water jet is actually a stream of water, it is difficult to understand the water also can be used in cutting hard materials. So for the hard material how the waterjet cutting accomplish? Although it is difficult to imagine, but the waterjet really easy to do it, and complete effect is very good, better than other cutting tools.

Waterjet discharged water is not ordinary water, but water first enter the high-pressure pump, after the water pressure, and then through some very high hardness fine nozzle orifice jet out, this strong flow of water with high pressure cutting the material easily. Of course, this particular device waterjet strict requirements on various aspects of water, pipes, nozzles and the others.

Pipeline, due to the water through a high pressure pump carries a high level of pressure, so the pipeline and flow of water also withstand the extremely high pressures. Pressure is far greater than the thin steel sheet can withstand the pressure, so the steel can easily be cut. Waterjet with water and also have a special request, to add the right amount of soluble emulsified oil in the water, and water in high pressure pump under pressure up to 1700 MPa, at such a high pressure spray of water can be as the knife cutting material.

As technology advances, the waterjet function also gradually improved, more and more users also recognized the value of this cutting method. Waterjet use and popularity in the same time, we need to continue to study, mainly to reduce costs, so that we can buy inexpensive water jet.

The latest study found that, by increasing the waterjet's pressure can effectively improve waterjet cutting capacity, and relatively low cost. Waterjet cutting machine manufacturers take advantage of these advanced high-presure technology, constantly pressurized water jet can produce continuous high pressure water, then through nozzle jet out with high cutting force, and the power is very high, relatively energy-saving, to abrasive material consumption is not large, the cost will be much lower.

The key is to engage in a waterjet efficiency is particularly high, it can save a lot of time. What time does that mean? Time is money, extra time can create more value for more profit. At the same time the high-pressure water jet is also a water-saving equipment, energy efficiency has a special advantage.