KOS teach you precisely adjust the waterjet pressure for cutting

With the popularity of waterjet cutting equipment, due to the waterjet cutting machine itself has many advantages, now the cutting processing industry people, are more and more using the waterjet as their cutting machine tools, but a lot of people are long-term waterjet fixed under the same pressure for the cutting operation, few people will according to different materials, different situations to reasonable adjust the water jet pressure. For each cutting sheet material is not the same, so the cutting pressure water jet cutting required is different, the following simple example and I will talk about why everyone in our water jet cutting, we need according to the cutting plate of different conditions (different materials, different thickness, etc.), the reasonable adjustment of water jet cutting pressure.

Waterjet through pressurized the water to generate high pressure water jet to cut the materials, but for different hardness, different thickness of materials, waterjet optimum cutting pressure is also not the same. Such as when cutting the ordinary stone, used to make mosaic are generally marble stone, relatively speaking not very high hardness, waterjet pressure preferably about 220MPa to 250Mpa. And if you want to cut the same thickness of the metal material, then waterjet pressure should reach 350MPa to 380MPa also added garnet sand can cut. So why not use the cutting metal pressure for cutting stone, waterjet is mechanical product, mechanical operation has its own speed, no matter how easy the material cutting, cutting speed is limited. The greater the waterjet pressure, the greater the cost of consumption, here including electricity costs, the loss of the machine wearing parts, and so on series of questions.

So if only cutting one material, then whether can not change the cutting pressure? Really, if only cutting one material, the beginning of the pressure is adjusted to the most suitable range, can be achieved without making adjustments. But waterjet, cars etc. all belong to machinery, driving people know that long-term driving in a speed range, is also damage to the car. So occasionally have to adjust the pressure appropriately to protect the machine, here only a little time to adjust, for the protection of the machine is much greater than the losses.

Source: http://www.waterjetnozzles.com