Waterjet parts / waterjet cutting machine routine maintenance

Waterjet parts and water jet cutting machine routine maintenance is very important. It is directly related to the waterjet parts and water jet cutting machine life and cutting performance.

1, Waterjet parts and waterjet cutting machine should be placed in ventilated and dry place, avoid moisture.

2, Waterjet parts storage room and water jet cutting machine room should not have corrosive gases.

3, Waterjet gearbox lubrication should generally be six months once, and should be regularly add lubricating oil to the transmission shaft.

4, Rainy day do not use water jet cutting machines and waterjet parts outdoors, to prevent the electrical system be affected with damp and cause an electric shock accident.

5, Waterjet Parts and waterjet cutting machine should be done the outside clean-up inspection before use, the body, the cutting torch and must adjust the gap between the moving parts, not loose; meanwhile to check whether the loosening fasteners, if loose should timely tighten.

6, Cutting worker break or leaving the workplace for a long time, the power must be cut off to prevent the motor overheating and burned out.

7, Waterjet cutting machine must have a person responsible for maintenance and regular maintenance. After work should do the cleaning work.

8, When found in the waterjet cutting machine commutation failure, can use the method of replace the fuse, repair the pressure switch, replace the clutch pressure wheel or replace the motor and control circuit elements to eliminate.

9, When found in the waterjet cutting machine trolley car walking instability with skid phenomenon, should guide processing straight, repair or replace the active roller, increase the weight of the car.

10, When the circuit voltage is too low, can use the voltage regulator to increase the voltage.

11, When the water jet cutting machine knead arm profiling gas cutting machine magnet wheel does not turn, should replace the fuse, repair pressure switch or replace the motor and control circuit elements.

12, When the water jet cutting machine rocker arm type profiling cutting machine magnet wheel slip fault, shall repair or replace the magnet roller, an appropriate increase in the thickness of the sample or removal of foreign matter in the rocker arm shaft and adding lubricating oil.

In short, only do a good job of waterjet parts routine maintenance, in the using process of the machine to give full play of the use performance, meet the technical requirements of the cutting process.

High Pressure Waterjet Parts in the daily use of the process, should pay attention to what maintenance details?

High pressure water jet cutting as a high-precision equipment, its parts also have the fine features. High Pressure Waterjet Parts for routine maintenance, has been the focus of attention of many businesses. We all know that anything that only by adhering to routine maintenance and repair, we can use more long-term. Here we take a look on the high-pressure waterjet parts of routine maintenance.

For high pressure waterjet routine maintenance, we summarize the following points:

First, at the first time of test running machine, we recommend that the operator in accordance with strict requirements for high-pressure water jet equipment start-up procedures, and in accordance with the provisions and the right to use of related accessories.

Second, it can not perform high-pressure water jet equipment idling for a long time, so not only will cause some damage to the device itself, will also give a certain degree of damage to the High Pressure Waterjet Parts. It is not conducive to long-term use.

Third, if the equipment is not used for a long time, high pressure water jet parts should be cleaned with water. This avoids when using again can not normal operation, causing stagnation to work, so the economic interests of businesses suffered damage.

Fourth, we should regularly check the performance of high-pressure water jet parts, and regular cleaning and maintenance. To clean the fouling among accessories and the ash existed. So as to maintain the performance of high-pressure water jet parts to meet our requirements. This is very important in the high-pressure waterjet parts routine maintenance.

Fifth, if you find a high pressure water jet part for damage or unusual circumstances, should inform professional maintenance personnel to deal with. Not privately disassemble or repair, so easy to damage the equipment.

The above points are summarized we focused on the high-pressure waterjet parts routine maintenance, hope to help you a deeper understanding of how to maintain high pressure water jet parts and other problems. Want to buy high-pressure water jet equipment, we suggest that you have to choose a professional regular manufacturers, so not only can avoid buying inferior products, the more you can have the perfect after-sales service.